Multi-user Communication in Difficult Interference

The co-channel interference (CCI) is one of the major impairments in wireless communication. CCI typically reduces the reliability of wireless communication links, but the difficult CCI which is no more or less strong to the desired signals destroys wireless links despite having myriad of CCI mitigation methods. It is shown in this paper that M-QAM (Quadrature Amplitude Modulation) or similar modulation schemes which modulate information both in in-phase and quadrature-phase are particularly vulnerable to difficult CCI. Despite well-known shortcomings, it is shown in this paper that M-PAM or similar schemes that use a single dimension for modulation provides an important mean for difficult CCI mitigation.Comment: 4 pages, 2 figs and accepted in IEEE ICASSP 2019, Brighton, U

Mediumband Wireless Communication

The fundamental phenomenon widely known as multipath is unavoidable in wireless communication, and affects almost every element of modern wireless communication systems. The impact of multipath on the received signal depends on whether the delay spread (i.e., spread of time delays associated with different multipath components) is large or small relative to the signalling period of the wireless communication system. In narrowband systems, the delay spread is about one tenth (or less) of the signalling period. The delay spread and the signalling period of broadband systems are in the same order of magnitude. In between these two extremes, there appears to exist an important, yet overlooked, class of systems whose delay spread is neither small nor large enough for them to fall into these two basic classes. In this paper, the effect of multipath on this class of systems denoted henceforth as mediumband is studied, and its channel is characterized in compact form in order to enable future research into this class of wireless communication systems.Comment: 5 pages, 3 figures, Proceedings of IEEE Vehicular Technology conference (VTC-Fall) 2022, London-Beijin

Doppler Effect Assisted Wireless Communication for Interference Mitigation

Doppler effect is a fundamental phenomenon that appears in wave propagation, where a moving observer experiences dilation or contraction of wavelength of a wave. It also appears in radio frequency (RF) wireless communication when there exists a relative movement between the transmitter and the receiver, and is widely considered as a major impairment for reliable wireless communication. The current paper proposes Doppler Assisted Wireless Communication that exploits Doppler effect for co-channel interference mitigation. The proposed system also exploits the propagation environment and the network topology, and consists of an access point with a rotating thin drum antenna. The rotating drum receive antenna is designed in such a way that it shifts the interference signals away from the desired signal band. This paper includes a detailed system model, and the results show that under favourable fading conditions, co-channel interference can be significantly reduced. Therefore, it is anticipated that more sophisticated wireless systems and networks can be designed by extending the basic system proposed herein.Comment: 10 pages, 13 figure

The Effect of Macrodiversity on the Performance of Maximal Ratio Combining in Flat Rayleigh Fading

The performance of maximal ratio combining (MRC) in Rayleigh channels with co-channel interference (CCI) is well-known for receive arrays which are co-located. Recent work in network MIMO, edge-excited cells and base station collaboration is increasing interest in macrodiversity systems. Hence, in this paper we consider the effect of macrodiversity on MRC performance in Rayleigh fading channels with CCI. We consider the uncoded symbol error rate (SER) as our performance measure of interest and investigate how different macrodiversity power profiles affect SER performance. This is the first analytical work in this area. We derive approximate and exact symbol error rate results for M-QAM/BPSK modulations and use the analysis to provide a simple power metric. Numerical results, verified by simulations, are used in conjunction with the analysis to gain insight into the effects of the link powers on performance.Comment: 10 pages, 5 figures; IEEE Transaction of Communication, 2012 Corrected typo

Performance Analysis of Dual-User Macrodiversity MIMO Systems with Linear Receivers in Flat Rayleigh Fading

The performance of linear receivers in the presence of co-channel interference in Rayleigh channels is a fundamental problem in wireless communications. Performance evaluation for these systems is well-known for receive arrays where the antennas are close enough to experience equal average SNRs from a source. In contrast, almost no analytical results are available for macrodiversity systems where both the sources and receive antennas are widely separated. Here, receive antennas experience unequal average SNRs from a source and a single receive antenna receives a different average SNR from each source. Although this is an extremely difficult problem, progress is possible for the two-user scenario. In this paper, we derive closed form results for the probability density function (pdf) and cumulative distribution function (cdf) of the output signal to interference plus noise ratio (SINR) and signal to noise ratio (SNR) of minimum mean squared error (MMSE) and zero forcing (ZF) receivers in independent Rayleigh channels with arbitrary numbers of receive antennas. The results are verified by Monte Carlo simulations and high SNR approximations are also derived. The results enable further system analysis such as the evaluation of outage probability, bit error rate (BER) and capacity.Comment: 24 pages, 7 figures; IEEE Transaction of Wireless Communication 2012 Corrected typo

A virtual MIMO dual-hop architecture based on hybrid spatial modulation

International audienceIn this paper, we propose a novel Virtual Multiple-Input-Multiple-Output (VMIMO) architecture based on the concept of Spatial Modulation (SM). Using a dual-hop and Decode-and-Forward protocol, we form a distributed system, called Dual-Hop Hybrid SM (DH-HSM). DH-HSM conveys information from a Source Node (SN) to a Destination Node (DN) via multiple Relay Nodes (RNs). The spatial position of the RNs is exploited for transferring information in addition to, or even without, a conventional symbol. In order to increase the performance of our architecture, while keeping the complexity of the RNs and DN low, we employ linear precoding using Channel State Information (CSI) at the SN. In this way, we form a Receive-Spatial Modulation (R-SM) pattern from the SN to the RNs, which is able to employ a centralized coordinated or a distributed uncoordinated detection algorithm at the RNs. In addition, we focus on the SN and propose two regularized linear precoding methods that employ realistic Imperfect Channel State Information at the Transmitter. The power of each precoder is analyzed theoretically. Using the Bit Error Rate (BER) metric, we evaluate our architecture against the following benchmark systems: 1) single relay; 2) best relay selection; 3) distributed Space Time Block Coding (STBC) VMIMO scheme; and 4) the direct communication link. We show that DH-HSM is able to achieve significant Signal-to-Noise Ratio (SNR) gains, which can be as high as 10.5 dB for a very large scale system setup. In order to verify our simulation results, we provide an analytical framework for the evaluation of the Average Bit Error Probability (ABEP)

Efficient Analytical Calculation of Non-line-of-sight Channel Impulse Response in Visible Light Communications

This study provides an analytical method to calculate the non-line-of-sight (NLoS) channel impulse response (CIR) in visible light communication (VLC) systems based on intensity modulation and direct detection (IM/DD). In this method, the NLoS channel is decomposed into a number of components with different propagation categories. These propagation categories are defined according to the number of reflections and the reflective surfaces that the light undergoes. The CIR corresponding to each light propagation category is analysed and the overall NLoS CIR is approximated by the combination of the calculated CIR components in different propagation categories. The proposed method has the major advantage of offering accurate results with very low computational complexity. Typically, a NLoS CIR with a time resolution of 0.1 ns can be generated within a second in MATLAB. Furthermore, the analytical results derived herein could be used as an analytical tool for the VLC channel characterisation study in future research